 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What modifications are needed to make a new thermostat work on a two stage cooling he
My boss has a heat pump problem. He is replacing his thermostat, his old t-stat has a Y1, W1,W2 wiring configuration. What modification need to be done to make his system run this model t stat (Honeywell RTH7400/RTH7500)?
|
||||
Check out some similar questions!
I had an Amana two stage heat pump installed with a Goodman two stage gas furnace. I have a Comfortnet thermostat and it omly uses the two stage heat pump and high side of furnace. What is the use to have a two s two stage furnace.
What is the conversion for wire connections from a Lennox to a White-Rodgers 1F72-151. The old connections were: G, W1, W2, Rc, Rh, Y1 and Y2. The new connections are: W2, E, O/B ,R ,L ,G, C and Y
My question is will a 2 stage heat/cool or a 1 stage cool 2 stage heat thermostat work on a single stage system? Thanks, Mike
Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:
What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
