Ask Experts Questions for FREE Help !
Ask
    Jayson12's Avatar
    Jayson12 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2012, 11:27 AM
    Deck belt will not stay on
    I put a new belt on the deck and it was working fin but it was cutting uneven so I adjusted the side to side and now the belt comes of as soon as you engage it
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 17, 2012, 03:53 PM
    Hi,
    Could you do the coutesy of more info? Like a brand, or deck size, or model?
    Peace,
    Clarke
    Jayson12's Avatar
    Jayson12 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 19, 2012, 07:37 AM
    Quote Originally Posted by crigby View Post
    Hi,
    Could you do the coutesy of more info? Like a brand, or deck size, or model?
    Peace,
    Clarke
    Sorry about that it is a 2010 46" Troy belt horse
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Jul 19, 2012, 04:15 PM
    Hi,
    There are a number of decks possible, so depending on the type of engagement the deck uses. What I will give you is a link to one of my site to the MTD deck page and you can scroll down to the 46" decks to see if that helps.
    MTD decks by crigby
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

JUst changed my cub cadet tractor to deck belt but my deck belt won't turn the blades [ 0 Answers ]

Can

I replaced mowing deck belt on mtd 42 in. Deck with correct part no. Now the belt I [ 2 Answers ]

I replaced mower deck belts on two MTD riding mowers, 38" & 42" decks. Both belts I used the correct part nos. according to the owners manual. Both belts seem to be too short. The decks stay partly engaged, making the motor hard to start. Once started, the decks have to be engaged, if not engaged...

Mower deck belt routing John Deere 420 - 50inch deck [ 3 Answers ]

Hi - I am looking for help on the routing for deck belt for John Deere 420 with 50 inch deck. Any help would be appreciated. [email protected] Thank you ! Steve

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

2003 murray lawn tractor deck belt won't stay on [ 1 Answers ]

I have a 2003 Murray Lawn Tractor, model #425007x92c. Whenever I engage the blades, the belt gets looser, and when they're disengaged it is tighter. It's a new belt and I know that it's the right one. I followed the diagram to put it on. What else could be causing the belt to not fit right? ...

View more questions Search