 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pressure gauge for well
I put a new pressure gage on and it's not reading. The gage is good and the pressure is good also . I can't find any leaks and some time when I turn on my water the pressure is weak and my water shuts off. The hot water tank makes a noise and after about 10 to 15 minutes my water comes back on.
|
||||
|
||||
|
What kind of piping do you have? Where is the pressure gauge mounted? Is it mounted on the piping or is mounted on the tank, or is it mounted some where else with a small tube to the gauge?
When your pressure is low or non existent, have you ever removed the cover of the pump switch to see if the points are closed? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The water stopped working all of a sudden! The breaker was fine and the gage is at zero. Help!
PROBLEM: I've completed the gas line installation to five end points with a max of 50 ft (three branches) from the meter. All end points have caps and no valves on the test. I've shut off the gas at the meter, installed the test gauge at one of the end points, and tried pumping it up. The needle...
I have a 2000 ford exsplorer with a v8 engine. It is the limited model with four wheel drive all of the time. I first noticed that after it rained, at start up the oil pressure gauge does not come up to normal until a few seconds of operation. Now its becoming like every time I start it up it takes...
Hi, I typed a whole thing and lost it so will start over. My son and I had a well drilled 20 years ago and piped water to our houses which are about 30 feet apart. Yesterday a couple different times I had dirt in my water. Today it cleared up pretty good but have heard noises in my basement like...
Where is the best location to install the oil pressure gauge for a "Correct" reading? A "Mechanical" gauge,sorry!
View more questions Search
|
