 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have This Heat Pump. I am using an Alerton VLD-362 Stat. With the flowing VLD TERMINALS 24 VAC - RED WIRE TO FURNACE GND - BLACK WIRE TO FURNACE BO-0= FAN - ...
I have a weathertron thermostat that a friend tried to replace with an inferior thermostate, he tried to replace the old thermostat and didn't know how to re-wire it correcly. So I looked it up on the web and tried to correct the problem, that the auxiliary worked but not emergency heat. Now the...
I am about to purchase a York heat pump. The model I first intended to order is BP090C00S2AAA4. This model has too much electric heat (18kw) and I don't know which part of the model number to change to reduce to electric heat to 9KW. My supply will not handle the 18 but is OK for 9. I tried to...
I have a Weathertron Termostat which controls my Heat Pump and Furnace - Model #3AAT80B1A1. Both the lights Auxiliary, and Emergency are burnt out. I would like to replace the Termostat. Where can I get a replacement or can you substitute a Honeywell with the same wiring as I will be doing it...
I Bought My House Last Oct. The Previous Owners Had A New Unit Put In 07/26/2005. It Has An Entended Warranty On Same For 5 Yrs Compressor 5 Yrs Parts.the Unit Was Cleaned And Serviced Before I Purchased The Hse. I Lived In The Hse All Summer Prior To The Purchase And Had No Problems The Year...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
