Ask Experts Questions for FREE Help !
Ask
    DOTMILLER's Avatar
    DOTMILLER Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2012, 01:40 PM
    Installing a New Breaker Box
    Do you have to remove the ground poles that are connected to replace a breaker box
    DOTMILLER's Avatar
    DOTMILLER Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 12, 2012, 01:42 PM
    Quote Originally Posted by DOTMILLER View Post
    Do you have to remove the ground poles that are connected to replace a breaker box
    why this is all I need.. and to replace a door bell and install a plug in the garage
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jul 12, 2012, 01:44 PM
    Sorry, I have absolutely no idea what you are asking in either post. :(
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

We are adding a breaker box in a barn the wire we ran from the pole breaker box [ 1 Answers ]

The wire is 2 ft short and the box will be too low... can I splice another piece to it? And how do I do it

Installing additional circuits in a full breaker box? [ 6 Answers ]

I currently have a 200 amp main breaker box in my house and is completely full of breakers. I would like to add dedicated 20amp circuit in my bathroom so I can install electric heated flooring below my tile. What would be the best way to add circuit? I assume I will need to add some sort of a...

Installing a New Main Breaker Box [ 1 Answers ]

I have a 98 year old house which has a main fuse box on the outside of the house. I want to install a new breaker box inside of the house in a closet. How do I install a breaker box inside and prepare it for the electric company to hook up to it?

Installing new breaker box [ 7 Answers ]

I replaced an old fuse box with a new Siemens breaker box with 2 breakers in it. The main wire comes in the top and I connected the hot wire on the left side and the neutral wire on the right and the ground in the neutral bar on the top. Now for the 2 lines that come in, I connected each white...

Installing a circuit breaker in an existing box; alternative forms of electricity [ 18 Answers ]

Hello: I have a Sears Craftsman 6hp 150 psi 33 gallon compressor. Electrical measurements are 120v/15amps - basically meaning it could run on normal household current. However, when I start it up, after about 3 seconds, it shuts off. I tried using the dedicated outlets in my apartment,...

View more questions Search