 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Moen extensa faucet handle shuts off by itself
I just replaced the cartridge in a Moen Extensa faucet. Now the handle flops down by itself, shutting off the flow. I can run it full open, but no flow level less than 100% will stay on. I've seen the suggestions to remove the cartridge and clean the center shaft of excess lubricant. Did that, no improvement.
Has anyone tried replacing the center shaft O rings with new O rings, same ID but slightly larger OD? Any new suggestions out there for this issue? |
||||
Check out some similar questions!
I have a single handle MOEN kitchen faucet. It was leaking from the base when it was on so I had to replace the cartridge or cylinder or whatever you call it and now the leak is gone and it works great. However, if you pull the handle all the way up to full on in any position it stays on. If you...
I have a single handle shower faucet. Took out the end screw and the small screw under the handle that tightens it to the unit. The handle will not slide off. Is there a step I am missing? How do I get the handle off??
Hey guys, In my upstairs bath I have a Mooen shower/bath faucet assembly. I have no idea whjat model it is as it was there when I bought the house. The problem is that presently the handle/knob is those horrible clear plastic ones. I would like to change the handle/knob over to a chrome...
The moen extensa (10 yrs old) handle won't stay on, it justs slides right back down
Hoe do I remove the plastic cover from a Moen Shower Faucet?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
