 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Power Vent Damper
Sears Gas-Fired Furnace Model # 867.763461. Pwr Vent Damper Model # 867.763471. Operator, Part # 604636, worn out. Sears has one for $155.00, I want something less expensive. Any suggestions? BTW I've run the furnace sense 1981 and the Pwr Vent Damper quit working 1990. I recently decided to try and fix it because small amount of outside air invades the basement.
|
||||
Check out some similar questions!
I live in very cold winter climate and I am looking for ways to reduce loss of warm air. One obvious source is the over-the-range microwave vent. As far as I know, the only thing between the range vent and the outside is a chinzy little flapper on the microwave. It flaps in windy weather, which...
For the last 3 months the water heater will not go through more then one cycle before having to be unplug.Any ideas?
I have a rheem power vent 21vp40e-1a my problem is a decline in the amount of hot water I get out of it. Once it begins to heat, the burner will light run for a few seconds and then shut off this will continue for a long time, then eventually it will stop. The amount time that the burner lights...
I built a chimney to replace a stinky power vent on an oil burner.Besides venting the 6-inch smoke pipe into the chimney what do I disconnect or change on the power vent?
I have a Rheem Power Vent 21VP40E-1 tank water heater. The vent fan stays on constantly but there is never an attempt to ignite. I have reset the unit, but problem persists. Any suggestions from the informed?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
