 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My hot water heater 's pilot light is on, but burner cut off after 5 to 10 minutes. Then don't back on unless manually set up higher temperature, then out again. The pipe out of heater is hot,but turning on the hot water tape, it's still cold water and pressure is normal. Recently some renovation...
Can anybody help me?? I am getting hot water going into my cold water tank, and this is causing water to come out the overflow. If I run the hot water tap it stops, and then when the hot water tank has filled again, the cold water tank overflow starts again.
Drip tube needed replacing in 4 year old 50 gal. tank so we did that but it did not fix the problem. With a full tank 1 person could have about a 7 minute shower as hot as you want it but then you have to start turning off the cold to make the shower go 15 minutes. Next we replaced the tank with...
Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...
Main burner for hot water tank does not shut off.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
