 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan on furnace when AC is on
Fan on furness doesn't run when the AC is on. If I put the fan setting to run, nothing happenes, If I put it on Auto, when the air comes on it will run but it seems a little slow and will not run for long. I think I smell a little ozone when I went in to change the filter but not sure. Have no idea if it runs OK with the furness itself running. It is 100F so I'm not going to even try turning on the heat, even for a little.
|
||||
Check out some similar questions!
Weather king furnace. Id blower starts gas lights then main blower comes on then furnace shuts off?
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...
Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...
Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
