Ask Experts Questions for FREE Help !
Ask
    ismailshareef's Avatar
    ismailshareef Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2012, 01:30 AM
    Gfci breaker wiring
    What is gfci? Where it can be capable for using and what is the advantages and this advantages please send to answer my mail
    Thank you
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 4, 2012, 05:34 AM
    Suggest you Google "GFCI circuit " for very extensive info. Basically they are safety devices used in areas where water may be encountered.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jul 4, 2012, 05:54 AM
    Basically it trips when the hot or neutral draw more than the other, which would mean an unintended path such as yourself. If the hot goes through you to ground, the hot is drawing more, and it trips.
    It is for safety, Particularly Outdoors and near water.
    I would Google to get more info as mentioned.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gfci wiring and bathroom switch controlling the power on and off to gfci plug. [ 3 Answers ]

I got a concern caused by my brother in law, I have had to perform a bathroom reno and needed to upgrade the wall switches and install a gfci plug, well all wiring was OK till after the drywall went up and now, no power to vanity light(power is on wire as it goes through attic, nothing comes up at...

Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker [ 10 Answers ]

:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...

Generator wiring: new generator gfci breaker tripping [ 2 Answers ]

Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...

Circuit breaker trip after install of GFCI breaker [ 3 Answers ]

I'm replacing an outlet under kitchen sink that garbage disposer and dish washer were plugged into because they stopped working. The old outlet was not GFCI. So I'm attempting to replace it with one. Our home was built in the '50s and has no ground line yet. I used an extension cord to plug them...

GFCI breaker wiring [ 10 Answers ]

I hired someone yesterday to install a gfci on the circuit that my pool lights and small backyard office are on. My home has a GTE sylvania box which uses those zinsco breakers and the gfci breaker for this panel is almost $300 each. So he ran a small box next to it, powered the box off the 20amp...

View more questions Search