 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hooking up 30 amp 4 wire generator cord to house main box. My main box has 2 hot 120v each and one grounding bar for white and copper grounds in the house.. I understand black and red go to the 2 pole breaker but white and ground go to the grounding bus bar ?or do I leave one off? ...
I have a wolf generator wp3500LR, which has been running like a dream, until today. It just cut out and I haven't been able to get it going again. I've checked the petrol and oil levels and both are fine. I'm not machanically minded so I haven't got a clue. Please help.
Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...
For connecting 7 MW generator to generator transformer, which is better cable or NSPB ?
I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
