How to remove single valve handle

KyLady Posts: 1, Reputation: 1

New Member

Jul 2, 2012, 03:24 PM

How to remove single valve handle - Basin Sink

I have taken the screw out of the side of the faucet and the screw below the Faucet. But nothing will budge. There is a ribbed part of the faucet but it will not turn. Can you help me?

This is an older Delta (appx 1972)

Thanks

Check out some similar questions!

How to remove handle from kohler k-r648 single control kitchen sink faucet [ 8 Answers ]

I am trying to remove single handle from kohler K-R648.(Water is oozing from handle.) I have removed set screw, but handle will not come off. I don't want to force too hard and break something. Any suggestions.

How to remove single valve handle - Delta Shower [ 48 Answers ]

I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...

How to remove handle on single handle moen shower faucet [ 5 Answers ]

I have a single handle shower faucet. Took out the end screw and the small screw under the handle that tightens it to the unit. The handle will not slide off. Is there a step I am missing? How do I get the handle off??

How to remove single valve handle [ 5 Answers ]

I have the same problem with the handle. The set screw has been removed,(by me), I can not pull or pry the handle from the cartridge stem.

Installing a single handle shower valve [ 1 Answers ]

I am installing a new shower valve (new construction) using PEX tubing, the tubing won't support the valve and the valve has no mounting tabs. What is the best way to anchor the valve body?

View more questions Search

Check out some similar questions!

Add your answer here.