Pulley Problem

Sheepysheepy Posts: 6, Reputation: 1

New Member

Jul 2, 2012, 11:29 AM

Pulley Problem

Pull the rope with the 20 N force, Find the acceleration of the rope.
Given the pulley is 0.5 kg and has no friction.

Sheepysheepy Posts: 6, Reputation: 1

New Member

Jul 2, 2012, 11:30 AM

Picture

Add your answer here.

Check out some similar questions!

94 honda civic pulley bolt is welded now pulley is knocking against timing cover [ 1 Answers ]

What do I do? Its wobbly and I can't remove the bolt because it has been spot welded I need my car I'm a singly mom w/disabled child

Pulley Problem [ 1 Answers ]

The angle is θ = 55.0°. The masses are, for the small pulley, m1 = 3.1 kg, for the traveling pulley, M2 = 5.7 kg, and for the crate, MC = 41.0 kg. What is the minimum tension with which the operator must pull on the cable (assume the cable is of negligible mass) in order to slowly raise the...

Pulley balancing [ 4 Answers ]

I would like to know how to calculate pulley diameter balancing in conveyor.if I not mistaken,rotation of pulley involve vibration.I want know how much rpm will effect vibration and how to calculate it.

Pulley bearings [ 2 Answers ]

I have a 2000 Blazer V6 that has growling bearings when first started on cold mornings. How do I identify which pulley has bearings going bad? I took the belt off and spun by hand the alternator, idler, and tension pulleys. None seemed too bad. Thanks for any advice, dbteeitup

How to take the pulley off [ 1 Answers ]

I have a troy-built lawn tractor I need to take the pulley off the shaft to take the belt out and I don't know how to get it off. It's the drive belt pulley.