 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Oil spewing out of breather pipe on briggs and stratton mower engine
I have 'oil' spewing out of the breather pipe of a Briggs and Stratton 11.5hp MTD RH115b mower engine( type 1119-E1). I found this after I had been unable to start the mower. I then removed the air filter assembly and tried re-starting the engine. It fired OK but within 30 seconds what appeared to be 'oil' bubbled up thru' the air breather pipe. I switched off and have not dared to try again. Please can anyone tell me how to sort this out?
|
||||
|
||||
|
Hi,
Something is causing the crankcase to create a n incorrect pressure differential. Candidates are the sump gasket, head gasket or bad O-ring on dipstick tube. They could have ruined the breather as well. Try spraying something non flammable ta these areas with a warm engine and running to see what reaction happens(water is NOT suitable.) Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
16 hp briggs and stratton engine pushing oil into crankcase breather tube. The engine is in a Cub Cadet 582 and the oil collects in the air cleaner pan. The oil level is correct. Any idea what might be wrong? Thanks in advance for your help.
What causes oil to blow through tube into carburetor and how do I fix it?
I have drained my oil and I don't know what type of oil I should fill it up with or how much it has no meter on it. Engine is 11h/ 3600 rpm Model:252707 Type 0620 01 Code 86080511 It says saej607 on cover is that it?
I have a 5 hp briggs and stratton engine. The engine would not start unless you dripped gas in the carburetor. I put a new diaphragm in, and it still will not run unless you drip the gas in. There is no trash or rust in the tank. Could it be the breather assembly? How do you tell if one is...
Model # 325431-126-99 much much oil should be put in it after an oil change?
View more questions Search
|
