Ask Experts Questions for FREE Help !
Ask
    ryan1974's Avatar
    ryan1974 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 30, 2012, 05:38 AM
    Using 120v lights in a 240v track
    Hello,

    I have a 240v lighting track installed in my home (I live in Australia where the current is 240). Assuming it fits can I plug in a 120v lighting fixture to this track and insert a 240v bulb to it?

    Thanks so much for your help in advance!

    Ryan.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Jun 30, 2012, 05:42 AM
    As long as it's rated for 240v, and it fits properly without modification, I don't see the problem.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

240v from 2 120v outlets [ 8 Answers ]

Hi, I'm new to an apartment from a house. I have a washer and dryer but no hook ups. Washer is plummed and working. Dryer needs a 240 outlet. My cousin is telling me that I can get two extension cords cut the female ends off, wire them into a new unmounted 240 plug, with enclosed box, and simply...

Wiring from 240v to 120v step lights [ 1 Answers ]

I have one hot black wire going directly from one light to second light to 3rd, 4th, 5th, & wire twisted together in each light hole, then feeding to other ligths around the deck in conduit. Then I have one hot red wire & one nuetral white wire which connects to first light. When I connect second...

Track Lighting: 6 pendant lights/4 sections of track 2 lights not working? [ 4 Answers ]

Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...

240v to 120v [ 1 Answers ]

I have a 240 volt breaker box, need to put 20amp breaker for 120v in it. How do I put a breaker in & get 120v. If I single phase it, I only get 94 volts

120v to 240v [ 5 Answers ]

Hello! If anybody could help me with this it would be great. I'm looking at buying a festool saw from america which runs on 120v but tools and electrical equipment in austraila run on 240v. Is there anything I can do to make it work and if so is it going to be a hassle??


View more questions Search