 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Originally Posted by emmacami
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
You've probably seen this question million times. I am installing a new ceiling fixture in my room where there is already an existing light switch. After inspecting the attic, I discovered that all access to the light switch is blocked off by plywood. I noitced though the wire going to the...
I removed a ceiling fan and now installing a light fixture. The new light fixture has two white, two black wires, and the green/ground. The ceiling has one black, one white, one ground, and one evil red wire. I connected the whites to whites, black to blacks, and grounded the green. Capped...
There are three wires coming out from the motor housing (which I cannot get to?). A Blue wire, a black wire and a white wire. The white wire appears to have disconnected from the motor housing (which I cannot get to?). Can I still hook up the ceiling fan with this white wire not connected in the...
I've just changed the fixture, black to black, white to white and ground to ground, but there is a red wire coming from the junctionbox. When I turned the breaker back on, the light works, but not the switch. Obviously, the red one controls the switch, but which wires do I attach it to?
- hampton fan has green, black, blue, black and White wires - ceiling has no color, red, white, and black wires I undertand black to black, green to no color, white to white, do I connect the red to the blue or just cap them. The fan doesn't have a light fixture, but I'm not sure what to do...
View more questions Search
|
