Ask Experts Questions for FREE Help !
Ask
    josephine bond's Avatar
    josephine bond Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 28, 2012, 04:27 PM
    How to troubleshoot a gas water heater whose burner will not stay lit
    Burner keeps going out in water heater..
    Have changed coupler... cleaned burner
    Flame is more intense at first but dies out
    In 30 - 40 seconds... anyone?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jun 28, 2012, 05:15 PM
    Hi Josephine

    Issue sounds exacly like a combustion/make-up air issue.

    Most likey what you have here is a clogged filter... could be exterior to the unit, could be interior (honeycomb)... could also be a flame sensor (unlikely, but wanted to mention this).

    Look around the base of the unit and maybe vacuum all around the exterior of the unit. If that doesn't make a change call the manufacturer of the water heater. All these water heater companies have websites and technical service departments that are very good at troubleshooting their specific products!

    If you need anything beyond that just let us know, OK?

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Heater Burner Won't Stay Lit... Sometimes Doesn't Light at All [ 1 Answers ]

I've got a natural gas electronic ignition water heater (no pilot light for me to light). There is a big sticker on the hot water heater that says "RUUD" but the manual stuck to the side of it says it is a "PowerVent" Residential Gas Water Heater. Anyway, I woke up this morning and there was no...

Hot water heater burner won't stay lit [ 0 Answers ]

My hot water heater is an American brand Powerflex. I have plenty of hot water and my pilot light is on but when the unit tries to heat up after a shower or something, the burner will kick on for about a minute or more then make a loud clicking sound and kick off. It will then immediately turn...

Pilot light will not stay lit in gas water heater after burner has been on? [ 6 Answers ]

I can light the pilot, but after the burner has been on and it goes off it is almost like it blows out the pilot.

State Gas Water Heater- md# gs650ybrt -. Heater won't stay lit. [ 1 Answers ]

Statye gas water heater model gs650ybrt. Heater won't stay lit

Gas Hot Water Heater will not stay lit [ 3 Answers ]

Our gas hot water heater pilot will not stay lit? Any ideas why?


View more questions Search