Ask Experts Questions for FREE Help !
Ask
    luisnevarez's Avatar
    luisnevarez Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2012, 03:46 PM
    Whirlpool WED5900SWO
    I have this problem, the dryer will not start, when u puch the start button, all it does is click. I have checked for cotenuity at door switch and start button. I repalced the thermo fuse, same situation. Any suggestions??
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 29, 2012, 06:59 AM
    Have you used a meter to find which safety is bad? It has several and unless you want to replace every part on the dryer you will need to use a meter. Here are instructions: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool [ 1 Answers ]

I took off the front of my whirlpool washer and un plug the door switch with out un plugin the washer form wall and now nothing works at all please help me

Whirlpool Senseon [ 0 Answers ]

I have had this Whirlpool for about 6 years, so of course my warranty has run out. We just moved into our first home (Not renting anymore!) and installed our machine. It worked fine for the first month no problems, by the way I've never had a problem with my machine before now. It runs fine, but...

Whirlpool washer [ 1 Answers ]

I have a model# LSQ9030PQ, I have identified that the agitator ears are worn, it has the two piece agitator, after removing it from the washer I can not separate the two, not wanting to break it, I need information on the producer to do it. Thanks Rich

Whirlpool dryer [ 1 Answers ]

Hello I have a whirlpool dryer heavyduty super capacity and it is not heating at all I took the back off and the coil is not turning red can you help me thanks

View more questions Search