Ask Experts Questions for FREE Help !
Ask
    cindysoles's Avatar
    cindysoles Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2012, 02:25 PM
    Would a problem with the neutral bar cause some dimming of lights
    My neutral bar is slightly corroded and I had it cleaned I have problems with the refrigerator coming on and either dimming lights or electric kicks off for a few minutes but comes back on without blowing a fuse
    Kyle_in_rure's Avatar
    Kyle_in_rure Posts: 341, Reputation: 10
    Full Member
    		  
    #2

    Jun 28, 2012, 08:27 PM
    I guess it's possible, but this could be a result of other problems as well. You might want to list some more specifics so that others can better answer the question. Does this only affect one circuit? Or multiple circuits? Is the fridge on it's own breaker/fuse or does it share a circuit with other appliances? Do other appliances cause the same problem? You also may want to add any additional information you know.
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #3

    Jun 29, 2012, 03:59 AM
    The neutral bar is corroded? Where is your panel located? If the neutral bar
    Is corroded there may be other issues that just don't stand out...
    If you are having a continuity problem with the neutral bar you can have intermittent fluctuations of voltage.
    This kind of problem can become severe... find a good electrician for a first hand opinion.

    If your panel is in a damp location, consider relocating it. Either way consider replacing it. 100 amp GE panel at Home Depot is only $100 or so.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do single pole breakers hook black to breaker and neutral & grd to bonded neutral bar [ 6 Answers ]

I have an Eaton Cutler-Hammer meter/breaker box. (MB816B200BTS-FLCH) I want to run a 20 amp circuit (underground wire) from this box through existing underground conduit to a receptacle for a dishwasher. This run would be app. 15' to 20' and from my main house panel it would be 40' to 50'. All...

Connecting Ground bar and neutral bar [ 6 Answers ]

I'm wiring an additional panel into a garage. It's connected to the Meter through a switch that switches the power between the company power and a generator. The main house panel is inside the house. I understand that the neutral and ground are connected in the "main panel" only and any subpanel...

Dimming the lights [ 1 Answers ]

[Hello there, I live in an older house and I have a lotof things plugged into the out lets, when my refrigeratror comes on it dims the kitchen lights, and when I use the toaster it dims the lights in the kitchen, what can be done to fix this problem?Also if I am using the toaster I can't use the...

What happen if you connect some grounds and neutral to the neutral bus bar and the do [ 1 Answers ]

The same conect some grounds and neutrals to the ground bus bar just using whichever bus bar is closest to the breaker so the wires don't have to travel all around the breaker box is that OK and safe to connect wires like that thank you

Lights dimming [ 1 Answers ]

What should I look for when troubleshooting lights that dim. When a contractor plugs in paint sprayer or air compressor it causes the lights to dim in the hallway. Too many circuits on that breaker? Or ---- Guy

View more questions Search