Ask Experts Questions for FREE Help !
Ask
    areil 16's Avatar
    areil 16 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2012, 12:42 PM
    What to fix my rca TV myself
    I have a rca lcd the picture quit on it but do have sound found that the ribbon that works the picture melted but did not harm the circuit board I am look ing for the part number and a place to buy the ribbon to fix it
    Model number L49FHD41YX8
    tootaloo699's Avatar
    tootaloo699 Posts: 39, Reputation: -2
    Junior Member
    		  
    #2

    Jun 28, 2012, 01:21 PM
    Found this RCA phone number for customer service for you, they should be able to give you a part number an the cost. If not they should direction to a authorized dealer in your area. Hope this was helpful! :)))
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dvd/vcr combo to a rca surround sound and old rca TV with inputs 1 & 2 on back [ 2 Answers ]

My Car Amp only has RCA imputs and my factory Head Unit does not have RCA output? [ 5 Answers ]

I recently got a RF p4004 4chan. Amp for my car and I'm looking to hook up a sub or two. My question is how can I hook this up. I have run all my amp wires (Bat. remote, ground) but the only input I have for my amp is a pair of RCA cables. I took an old cable and cut the terminals off one end...

Rca TV [ 1 Answers ]

I have an RCA TV and its stuck with the letters SVID on the screen and won't chang channels... help me

Rca to rca vs rca to s-video [ 3 Answers ]

My question is this. I now have my tv2 output on my Bell 9200 receiver connected with 50 ft of inexpensive rca to rca composite video cable to my second TV. The picture on my TV is acceptable but I am not completely satisfied.Would a high quality rca to rca cable or a high quality rca to s-video...

Can I fix hazardous steps if a contractor is refusing to fix, and threatens to sue? [ 1 Answers ]

I live in central Texas. I hired a landscape contractor to install retaining walls and a patio which included 4 steps in stone. These steps range in size from 6.5" to 9.5" and the tallest is on the top! They are very dangerous. He refuses to do any fixes, and walked off project. At one point in the...

View more questions Search