 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I replaced my old White Rogers Heat pump thermostat model number 8848 E7 with a new Digital Hunter Just Right digital thermostat model number 42999B. I followed the directions from the diagram shown in the instructions for a 5-wire heat and cool system. I did the following. G to G, W to W, Y to Y...
I need to set my thermostat to were it well not go under 68 deg right now it will go down to 45 and my children keep putting it down that low so I need to program this thermostat so this don't keep happening it is the (DICO white-rogers) thanks if you can help
I have a robetshaw thermostat and I have only 2 wires a white and green I can get everything working except it won't register to my heater can someone help me? It is a deisel furnace the brand is an american standard.
I have a two level townhouse with heat/ac. The thermostat is downstair. My question: Can I install another thermostat upstairs to constrol the heat/ac and turn the switch of The downstair thermostat to off.
About to install a new Honeywell RTH6300B thermostat. I have 4 wires coming from the wall... green, white, red and blue. Old thermostat had connections for W, RH, B, RC, G, O, Y... (Old thermostat was White Rodgers model # 1F86-244.) New Honeywell RTH6300B thermostat has connections marked G, W,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
