 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant thermostat troubleshooting
I have a Bryant furnace/ac unit and thermostat. I had a new ac unit installed because the compressor went on the old one now my thermostat says outdoor air sensor error. I tried a new sensor and nothing changed could there be something wrong with my thermostat?
|
||||
Check out some similar questions!
I have a 350mav plus 90 11yrs old It starts heating up a little bit than kicks the burner switch off and the cold air fan continues to blow
Why is the fuse blowing every time my generator shuts down after running. Model # ASPAS1BBA015 Serial # 4605V06869
When gas furnace comes on I have flame rollback and it blows out pilot could this be a crack in the heat exchanger?
New system (installed 6/2009): 2 zones, Bryant Evolution Control thermostat. Control panel regularly shows "system malfunction" reading with several "active events" recorded, although heating continues. Certified Bryant repair person here several times, but can't determine the problem. Says the...
I have a 23 year old "Bryant Plus 90" furnace. Until my house reaches the thermostat setting the burners remain on and the blower cycles on and off in 7 to 10 minute cycles. Should the burners remain on without the blower being on?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
