 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My old thermostat had only two wires and they have 24 volts AC to them. Iconnected them to C and R terminals and the display works fine but will not start the furnace. I then used a jumper wire from C to W1 which is the furnace and as soon as the furnace kicks on the display goes blank. Is there...
I can't fing a model # on my fan. The remote's number is UC 1018. How do I find the ceiling fan's model brand and number? I broke the light globe on the fan.
We've had this light for several years, and just now all the bulbs are burned out. There is no visible way to remove the globe. There is about an inch between the ceiling and the glass, and there are three white plastic clip things. Two of them don't budge at all, and one moves just slightly, but...
I have a chandelier with 6 lights . The globe covers are open facing down and after I remove the bulb , I see a thin round matal piece that has a small tab on each side. I was able to remove 1 metal circle by pinching the 2 tabs but I couldn't budge the globe. So I tried another light and couldn't...
In January 2006 I had a new furnace installed ( a coleman gas furnace Model # BGAA070BDTBJ) and this ran fine throughout the rest of that winter. Early in the summer our thermostat went out and I installed a new Hunter thermostat # 42999 and I hooked it up as shown in the directions and it worked...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
