 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Replacing a sill plate under an exterior door. I am finishing the basement in the house we recently moved to and believed that I was in the home stretch - until... I removed the last of the framing and insulation and found a section of severely rotted sill plate and rim(skirt?? ) board...
I'm replacing the studs and sill plate in a bedroom that was a attached garage. The sill plate has anchor bolts through it. Now what is easier or best way to anchor the new sill plate. To try and line up the old bolts and drill new holes, I can not use the old sill plate for a jig, or rebuild the...
I asked this question earlier about a rotted sill plate and if it could be replaced I thank everyone for the responses I found the source of the rot the roof was leaking it has been repaired this is not a bearing wall if I just leave it what will happen there is no weight on the wall any responses...
I recently took all the sheetrock from an outside wall I noticed the sill plate along the bottom of the studs is rotted no termites maybe just dry rot is there any way to replace without tearing the whole wall down
On a recent home inspection the inspector noted wood damage to a section of the sill plate at the font wall of the basement near the base of the stairs; replacing the damaged wood is advised. Can you replace a sill plate or a section of the sill plate in a home that's 64 years old?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
