Ask Experts Questions for FREE Help !
Ask
    ang a's Avatar
    ang a Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2012, 03:19 PM
    Ignition trouble
    I have an 81 Chevy silverado that won't start an I believe it's the ignition. How can I bypass this an get the truck t start?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jun 22, 2012, 03:59 PM
    If it's a crank but won't start problem:

    . Remove and fully charge the battery. Most auto parts stores will do this for free.

    . Check all under hood and under dash fuses with a test light or multimeter.

    . Check for spark. If it tries to start but doesn't, replace the Ignition Control Module (ICM).

    . Check the ignition switch for wear, pitting, or melting, after disconnecting the negative battery cable, if you suspect the switch at all.

    Never try to by-pass anything!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jun 22, 2012, 05:54 PM
    I think that is old enough to Hotwire the old way, Jump Power to the coil, and a screwdriver at the solenoid.
    It may help narrow down, and verify starter and solenoid are not your problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Girlfriend trouble and sex trouble... [ 29 Answers ]

Okay so I fell in love with this girl back in last September and now it is April. I found out in December she is still talking to her ex who is in jail, they can somehow talk through the phone, I didn't know that was possible. Anyway, I love having sex with her up until recently. I either bust too...

Have trouble sleeping - can wake up 8 times in the night... What's the trouble [ 2 Answers ]

I have trouble with my sleep. Have passed many test, like sleep apnea and do not have sleep apnea. If not that, what's wrong with me?

No power to ignition module or PCM ignition fuse, any thoughts [ 1 Answers ]

It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated

Trouble shoot ignition coil 98 honda civic [ 2 Answers ]

I have a feeling my ignition system is the problem, my 1998 honda civic won't start. But how do I trouble shoot the ignition coil before I replace it?

View more questions Search