 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an MTD 14.5HP 42" that has a Briggs and Stratton OHV engine. It is about 10 yrs old and has been sitting out for a couple years because I no longer had much of a yard to cut with 3 kids worth of stuff in back. We bought a new house that has 2 acres so now I need this again but I do...
I was cutting the grass when the mower just took off like it switched to a higher gear by itself I tried to engage the clutch/brake but it did not help I tried to switch to a lower gear but that did not work either I had to turn the key off to get it to stop did something come loose on the trans...
It was running fine and while in the midst of cutting, it died and when trying to restart, it would just click. I initially thought starter, so I rebuilt and it is working fine when benchtested. I moved over to the solenoid and replaced as I had a new one to begin with. Tested batter as well,...
I have a 15.5hp Briggs & Stratton lawn tractor. It has an habit of backfiring when you shut it off after popwering down. It did this last Sunday while mowing and it will not start now. I looked at the valves, it has overhead valves & the exhaust valve is very loose. How do I adjust? Thanks! ...
I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...
View more questions Search
|
