Ask Experts Questions for FREE Help !
Ask
    Darngroovey's Avatar
    Darngroovey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2012, 05:39 PM
    Water heater
    My Rheem powervent 4.7 years old. Flashing code says flammable vapors present. How do I reset?

Check out some similar questions!

No or very slow hot water from gas water heater, heater makes lot of sounds [ 1 Answers ]

There is problem with our hot water system, not getting hot water while as cold water is OK. Starting hot water there is lot of explosion sort of sounds from water cylinder and hot water will start dribbling and stops after some time.

Tankless water heater v conventional water heater? [ 2 Answers ]

This question is for Speedball1 or anyone else that may know. The gas water heater that I have is approximately (11) years old. I have heard pros and cons about flushing it out at this point in time since it has not been done before; I inherited it, so to speak. I have been told that doing so is...

Water heater leak (cold side only) where the nipple meets the water heater [ 9 Answers ]

I just bought a water heater and completely installed it. When I turned on the water supply, a very very very slow drip can be observed where the cold water nipple screws into the water heater. I shut off the water, relieved the pressure and unscrewed the nipple. I then re-apply the teflon tape...

Tankless water heater versus regular water heater [ 2 Answers ]

I need to know basic water heater tank maintenance

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.