Ask Experts Questions for FREE Help !
Ask
    engineermechani's Avatar
    engineermechani Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2012, 12:31 AM
    How to select gearbox
    Hello guys,

    I have a platform having weight of 1 Ton. There is a load on platform having approximately same weight (i.e. 1 Ton). The platform has to move with a speed of 150 mm/min. I have to motor and gearbox to move this platform. Kindly help me to carry out the calculation.

    Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 8, 2012, 08:16 PM
    Hi,
    A better place to look for something like this info would be:
    Mechanical and Design Engineering News | Machine Design
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to select the gearbox for load 10Ton [ 7 Answers ]

Please specify how to calculate the torque required for 10Ton Load

How to design gearbox [ 1 Answers ]

How can I select my life

Gearbox on Clio [ 1 Answers ]

Please can someone help I have a Renault Clio elise T reg, I am unable to get into any gear except 5th gear of which it does drive in 5th gear, I was told that the gearbox had gone so I got another one (2nd hand)had it but in and still the same problem, I cannot believe that two gearboxs have the...

Kz650 gearbox [ 1 Answers ]

I was just given a kz650 from a neighbor. I have been unable to move it because it seems to be locked in gear. Any suggestions?

I think my gearbox is messed up! [ 1 Answers ]

On my murray tractor I disabled the automatic driving so I could push it. Just like the diagram says. But when I try to push it, the tires in the back spin in opposite directions! If the left goes clockwise, the right goes counter-clockwise! Is this normal? If the engine is running will it drive...

View more questions Search