 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Though electric heater in one thermostat. One is working the other is not
When I turn on the thermostat, you can hear the heater click, but nothing happens after that. You can feel that the pilot is lit, but the fan won't turn and no heat blows from it.
I want to put an electrical heater in my garage. The specs are as follows: 10.0/7.5 KW, 240/208 V, 1/3 Phase, 49 amps. Would I be OK to run 8 gauge wire on a 50 amp 2 pole breaker or should I go larger? The 49 amp rating is the max at start up and the unit averages 42 amps while running. Also I am...
I'm installing a 208/240 electric garage heater. The KW is 7.5/10.0 and the AMPS is 36.0/42.0, BTUs per hour is 25.6/34.1. I plan on using a 50AMP breaker for this heater and running number 8 wire from my main panel which is about 100 ft from the heater. Is the wire size and breaker size...
How do you troubleshoot a thermostat on an electric water heater to verify if its working or not? Bench testing and testing on unit?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
