 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Connecting 1/4" plastic tubing
I am connecting my fridge to the water line as well. However, my fridge doesn't have a connection on it, just the plastic 1/4" tubing. I tried connecting it to the copper water line using the compression joint as you've answered in other questions, but the brass compression part will NOT lock onto the plastic, and thus I have leaks. What type of fitting do i need on the plastic end? Also, if I am connecting two 1/4" plastic lines, what fittings would I buy for that?
|
||||
Check out some similar questions!
My father needs to replace an existing 3" copper bathroom drain with new 3" plastic... How does connect the existing 3" copper with the new plastic?
Hello I have 3/8 plastic tubing to connect my faucets to the existing stops. At the faucet end, I have a rubber cone washer w/ a brass ring. Is this a national plumbing approved connection?
We just got a new Refrigerator and it has an ice maker. The plumber that came to install it used plastic tubing to hook up the ice maker instead of the copper tubing that Sears sold me and that they told me he would use. The plumber said that plastic was better and that it wasn't necessary to use...
Hi friends, I have a concrete slab foundation. In one full bath, I'm changing out the tub to put in a sauna tub, going from 60x30 to 60x32. The toilet is right next to the tub, so I want to move the toilet over at least 4" and change the sink to a pedastal sink to make room for the move for...
I am installing a toilet in my basement. I have a 4" cast pipe that is flush with the floor (Plug in it,no bell). I am installing a back outlet toilet and piping it over to the the 4" cast pipe. What do I need to connect the ABS to the cast pipe.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
