Ask Experts Questions for FREE Help !
Ask
    Sheena11's Avatar
    Sheena11 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 17, 2012, 01:03 PM
    Kohler faucet repair parts K-R648-VS
    I am uncertain how to take the faucet head apart in order to clean the strainer and it looks like I need to replace the O ring that you can see when you pull the head down. When I change from spray to stream it doesn't change fully (on stream there are still little "sprays" around the stream.
    BritInFL's Avatar
    BritInFL Posts: 1, Reputation: 1
    New Member
     
    #2

    Nov 16, 2014, 09:53 AM
    I just soaked the head in CLR for a few hours. It's the calcium buildup that causes the problem so get rid of that and it'll work good as new.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove handle from kohler k-r648 single control kitchen sink faucet [ 8 Answers ]

I am trying to remove single handle from kohler K-R648.(Water is oozing from handle.) I have removed set screw, but handle will not come off. I don't want to force too hard and break something. Any suggestions.

Kohler K-R648 leaking around faucet on off handle [ 1 Answers ]

Leak is occurring around the handle that turns the water on and off.

Kohler k-r648? [ 0 Answers ]

I have a 3 year old Kohler K-R648 faucet. The faucet handle will only go up 1/3 of the way. I can't get much water flow. What could be wrong.

Kohler K-R648 [ 2 Answers ]

Have had this in our Kitchen for about 4 years. This morning when I turned it on to hot the water pressure drops and can't get hot water to work. The cold water is fine. Any suggestions on what could be wrong and how to fit it?

Kohler k-r648 faucet cold side not working? [ 1 Answers ]

Just install a Kohler K-R648 facet and the cold water side does not work. I tried connecting the cold water connector to the hotwater pipe but still no luck. I tired connecting the hotwater connector to the cold water side and it works. Where should I be looking now. Does the connector hoses on the...


View more questions Search