Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water Rushing through baseboard heat pipes
[ 4 Answers ]
We have a Weil Mclain Gold Oil furnace that is approximately four years. The furnace generates heat through our hotwater baseboard heat pipes. Lately we hear the sound of rushing water in the pipes. In the past we have heard banging when the system is cold and heating up, but this is something...
Is it safe to wrap (i.e. Insulate) baseboard heat pipes?
[ 2 Answers ]
I'd like to wrap the heat and hot water pipes in my basement/garage. A fair portion of the plumbing for our baseboard heat, not to mention all the hot water in the house, runs through the unheated half of our basement and garage (which doesn't even get the benefit of the radiant heat from the...
Hot water baseboard heat noise
[ 5 Answers ]
I have a 4 zone hot water baseboard heating system. When the thermostat setting is satisfied, the zone valves close with an extremely loud banging. The Valves are 3/4 inch copper, Honeywell #40004850-001. The heating system is 4 years old and this problem started about 2 years ago and seems to get...
Baseboard Heat Banging Noise
[ 11 Answers ]
Hello All, For starters I've searched this topic and haven't found anything that can apply to my situation. To set this up. We have a boiler/baseboard heating system that makes loud banging noises when it cycles off, on the first and second floor zones. When heating up it makes a creaking...
Baseboard heat banging - pipes bled already
[ 2 Answers ]
Hello, I've been reading through many of the questions regarding baseboard heating noise. I have a water expansion tank with a 2-week-old air valve and have had the pipes bled twice in the last 2 weeks by 2 different technicians to no avail. The technician last week manually filled our tank... View more questions Search
|