Ask Experts Questions for FREE Help !
Ask
    jpotope's Avatar
    jpotope Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2012, 11:12 AM
    Moen kitchen replacement cartridge
    Have a Single control kitchen faucet w/ pull out spray and want to replace the cartridge but it appareas sealed inside the brass cover with no way to access, pull the illustrated retaining clip, and then pull out the old cartridge. Is this cover soldered on over the cartridge? Bought in 2004 and think it's a model 7560
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jun 17, 2012, 06:45 AM
    Don't really know what cover you are talking about but here is a breakdown of a 7560.
    Attached Images
  1. File Type: pdf 7560pt.pdf (828.3 KB, 204 views)
    2. massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Jun 17, 2012, 07:31 AM
    You have to remove the hose (drop it to inside or even pull it out through the "brass cover") in order to remove the "brass cover"... ;)

    Get the hose out of the way and then pull upward hard... should release!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

After Moen cartridge replacement the hot and cold directional control was reversed [ 3 Answers ]

Replaced Moen wall single lever (flow & temperature control) faucet (1986). All appeared to go well but my single lever control is reversed, left (counter clockwise) is now cold and right (clockwise) is hot. Did I install it upside down or something?

Replacement part for Moen 1201 Cartridge [ 4 Answers ]

I tried to change the cartridge in my shower. Home Depot plumbing "expert" said the Moen SKU 1200 was the replacement, and it looked very similar to the naked eye. However, when I tried to install it in my shower it would not go it. I added silicone and it still did not work. After unsuccessful...

Moen shower cartridge replacement [ 3 Answers ]

I have removed the old cartridge and put the new one in. The problem I am now having is the locking ring will not go back in and I think it shouldn't be that tough to slip it back. What am I doing wrong?

Moen replacement cartridge problems [ 4 Answers ]

I have a small diameter MOEN tub-shower valve. It has a lever, setscrew to hold the handle on, pull out to turn on and rotate for temperature. The cartridge seems quite small. I didn't try to pull the cartridge until I could get another one. Home Depot has one but it is too large and different....

Moen shower cartridge replacement [ 1 Answers ]

I have a moen single handle shower faucet that leaks. I think the model number is TL2301 Could the cartridge need to be replaced and how is ths done.

View more questions Search