Ask Experts Questions for FREE Help !
Ask
    John hall's Avatar
    John hall Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2012, 02:34 PM
    Crafsman rider
    I took my mower deck off to Ching the blades and when I put the deck back on the mower won't start all it dose is turns over
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 14, 2012, 03:05 PM
    Any wiring or switches disturbed when removing/installing deck?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Crafsman 205 mph gas blower what is the spark plug gap,thank you [ 1 Answers ]

Modlel 358-797342

Problems with a crafsman briggs & stratton 12.5 engine [ 1 Answers ]

I have an older craftsman mower with a briggs 12.5 hp mottor it had a replaced key for the key way ran grate then wouldn't start key way still looks good but the thing just spitts fire back out the carb any ideas

Murray rider [ 1 Answers ]

Hi again... I ask a question about my 20 horse briggs an stratton murray rider... I made sure I have a fully charge battery on it an it is still clicking at the solenoid... u said start with the starter first... what try getting a new one or is there something I can do to that one?? the motor turns...

Crafsman model 9172554590 lawn tractor [ 6 Answers ]

I have a Craftsman 917255450 lawn tractor that will not start. I have troublshot all the switches and they are working. The engine will turn over, but will not start. There is plenty of gas going to the carb. I checked for voltage at the Ingition Module connector and I have no voltage in either the...

View more questions Search