 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas water heater will only work for a hour are so!
I have a gas water heater with electric spark ignition. I have cleaned the filter- erester under the water heater.I will start the pilot light and then the main flame and it will stay on for a hour are so then will stop working.is it the thermostat or what?I have not had this problem before! It seems like once it heats the water it want turn on again to keep the water hot.
|
||||
Check out some similar questions!
No or very slow hot water from gas water heater, heater makes lot of sounds
[ 1 Answers ]
There is problem with our hot water system, not getting hot water while as cold water is OK. Starting hot water there is lot of explosion sort of sounds from water cylinder and hot water will start dribbling and stops after some time.
Converting lp gas water heater to natural gas
[ 3 Answers ]
Is it possible to convert a lp gas water to a natural gas water heater or will I need to get a new heater?
In propane heater, ran out of gas, now heater will not work,what do I do, thanks.
[ 1 Answers ]
Propane gas heater
State Gas Water Heater- md# gs650ybrt -. Heater won't stay lit.
[ 1 Answers ]
Statye gas water heater model gs650ybrt. Heater won't stay lit
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
