 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
wiring up new dual run capacitor
My condenser fan motor stopped spinning, I ordered a new motor and dual run cap. However, while I was away the project almost got started (brother-in-law). He never marked which wires go to wich terminals on new capacitor. Is there any way to find out. The fan has 1 going to capacitor then there are 2 larger wires ( 1=red and 1 = grey) and 2 smallers wires both black.
|
||||
Check out some similar questions!
I am replacing my 3 wire condenser fan with a universal that has 4 wires 1 black 1 white 1 brn/white stripe 1 brn I bought a new dual capacitor at the same time so my question is where do the 2 brown wires go on the dual cap? The old one had one brown wire.
I bought a replacement fan motor my old motor had three wires brown,purple and black the new motor has four wires brown,brown/white,yellow and black how do I hook it up to a dual compacitor
Hi, I have a dual run capacitor with the following specification but couldn't find any exact match in the market. 35 + 4 uF 370 V. Could I use 35 + 5 uF instead? If not, any other alternatives? Thanks
Hello all, I have an older Amana HVAC system in my home. Home is 6yrs old. It Appears that my condenser unit was struck by lightning because one of the 3 terminals on the dual run capacitor was blown/melted and all the wires connected to the dual run capacitor were fried (It did storm the...
I am trying to chang my fan motor and the new motor calls for a different capacitor... the wiring is obviously different. I took the old wires off the old capacitor and wired in the new capacitor as directed on the new motor. Leaving the old one just for the compressor wired the same as it was. The...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
