 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a 2 ton Achiever and the fan has stopped running on it. It feels warm to hot on the top cover at the motor mount. I ohmed the 3 motor wires to be good. I measured the capacitance on the 35/5uF cap and the fan side is off by 4% while the sticker showes +- 6% tolerance. I also replaced the...
I have a 2 ton Achiever and the fan has stopped running on it. It feels warm to hot on the top cover at the motor mount. I ohmed the 3 motor wires to be good. I measured the capacitance on the 35/5uF cap and the fan side is off by 4% while the sticker showes +- 6% tolerance. I also replaced the...
I have a 20 year old RUUD 2.5 ton heat pump. The outside cooling unit started to "click" a few months ago when it was coming on. Sometimes it would come on and sometimes it would not. It eventually stopped coming on. We have replaced the contacts and capacitors but it does not help. Also, if we get...
I have a Ruud 90 Achiever, model number RCBA-3765GG17XI, MFD: 2003 using natural gas in my condo. Last week I noticed that the blower was turning on but no heat was coming out. I tried to turning the thermostat to the "off" position and then back to "on". When I did this the pilot would click...
I have a Rheem heat pump and have purchased a replacement condenser fan motor. It had an Emerson KA55HXPAM-7255 and was crossed over to an A O Smith ORM 1008. My problem is the wiring, the new motor has one more wire than the old one. I had orange, brown, black on the old one. The new one has...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
