Ask Experts Questions for FREE Help !
Ask
    4inces's Avatar
    4inces Posts: 12, Reputation: 1
    New Member
     
    #1

    Jun 13, 2012, 04:36 AM
    2 switches
    I want a diagram to wire a ceiling fan that has two switches in a gang box to operate the light and the fan separate with power coming in at fan
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jun 13, 2012, 05:34 AM
    ..
    Attached Images
     
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Jun 13, 2012, 06:42 AM
    HK, I always hope your near when it comes time for a diagram, always a wonderful job.

    One thing I like to add, per Code, when the white wire is used as a hot, which is allowed for a switch loop, it must be re-identified as a hot, "permenently .... by painting or other effective means at its terminations and at each location where to conductor is visible and accessible".

    A black marker works fine.
    4inces's Avatar
    4inces Posts: 12, Reputation: 1
    New Member
     
    #4

    Jun 13, 2012, 07:10 AM
    These are single pole switches in your diagram correct
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #5

    Jun 13, 2012, 07:17 AM
    Yes those are single pole switches.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why do my lighted rocker switches flicker ? I don't know the model # of the switches. [ 3 Answers ]

Why do my lighted rocker switches flicker ? I don't know the model # and they are 3-4 years old. THANKS

Three way switches [ 1 Answers ]

I'm wiring my basement and have two three-way switches in a two gang box. The left switch (S1) and another 3-way control four recessed lights. I want the switch on the right of the box (S2) to control another set of recessed lights. I want to power S2 using jumpers from S1. Is this possible? If...

TV switches off [ 3 Answers ]

Hello, We have a hitachi regular TV about 23 inch. The problem is it keeps switching it self off to stand by when we are watching it. We've taken the batteries out of the remote but still occurs and checked the plugs. Any ideas on how to fix it, would be a great help Thanks The boys at...

Switches on and then off [ 13 Answers ]

When switching on my PC, it starts up, the screen flashes and then it goes off again. I tried starting in safe mode, same thing happens, it just starts up and then goes off and there is nothing, completely dead I am using Windows XP I have tried taking all the plugs out and putting back in -...

Three way switches [ 1 Answers ]

I am trying to wire three way switches with multiple light between them. I have 12/2 from the panel to the first switch then 12/3 through all the lights. At the last light I switched the common and neutral to supply power to the end switch. From the first switch I can control all lights (5...


View more questions Search