Ask Experts Questions for FREE Help !
Ask
    stuartcormier's Avatar
    stuartcormier Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 12, 2012, 11:47 AM
    Quattro consolidated industries schematic
    I have a condensation problem somewhere in the main air shaft around my Quattro furnace, model # MAA 080 NR4R. I think a drain must be clogged, maybe an overflow of the drip pan possibly? Anyway I'm trying to find a schematic to know where to look. This unit was installed on the main floor, not in the attic.
    hrk702's Avatar
    hrk702 Posts: 1, Reputation: 1
    New Member
     
    #2

    Aug 2, 2012, 05:50 AM
    I do not have the answer to this, however, I have the same problem. My initial thought is that the unusually high humidity has caused condensation. I would also be interested in seeing a schematic. If you get hold of one, please post. Thank you

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Quatro consolidated industries furnace flame seņor [ 1 Answers ]

Furnace will not turn on

Quatro Consolidated Industries heater [ 4 Answers ]

The heater lights up and the fan motors turn on, I can see all burners are lit but the heater does not go to the next step of blowing the hot air through the ducks it turns of and the timer led flashes twice and that indicates a primary limit circuit open error. This heater is 16 years old and in...

Consolidated industries furnace true blue 90 quatro gas valve [ 0 Answers ]

Hoe do you replace the gas valve?

4.0 quattro surges [ 3 Answers ]

have a murry push mower model 22516x92b but it runs and surges. Cleaned carb out still dose it. While the air cleaner is off. I unbolted the starter housing and pulled that off while running and then it was fine. I can't see where the govener parts is haning up on anything so I put the...


View more questions Search