Ask Experts Questions for FREE Help !
Ask
    tdirvine's Avatar
    tdirvine Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2012, 05:16 PM
    Above ground pool will not backwash
    Our sand filter will not backwash... know why?

Check out some similar questions!

Pool on a multi-part valve when switching to backwash [ 0 Answers ]

On a multi-part valve when switching to backwash do you leave the pump motor on ?

Should my outtake on my above ground pool be shooting up,down, or in middle of pool? [ 2 Answers ]

Above ground pool water outtake should it be shooting to side, on top, on bottom, or somewhere in middle?

Leveling the ground with mulch for above ground pool [ 3 Answers ]

I was wondering if I could use mulch to level the ground for my above ground pool. I was told not to use sand, and I have a hard time digging.

Water behind a pool liner of an above ground pool [ 1 Answers ]

Hello, the liner in part of my pool is below the water level and thus water is now behind the liner. I cannot pick up the liner because it is so heavy with the weight of the water. 1. Is this hurting my pool 2. How much to replace a new liner and have it installed for a 16ft round pool ...

Pool backwash line into clean-out? [ 3 Answers ]

I have an in-ground pool that we put in this summer. Out by the front porch we have a sewer/drain clean-out pipe sticking up. My question is... would it be OK to plumb the backwash line from my pool filter to this pipe? To utilize it as a drain? I was thinking that I could put a check valve on...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.