 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot point water heater problems
I lit the pilot as it is described in manual and set temperature but it does not heat water. So I shut it off and tried a few times again. I can see pilot flame through window it stay lit.turning the knob to the on position BEFORE setting the thermostat' dial?
And turning it self off. Again and again. |
||||
Check out some similar questions!
Our pilot light keeps going out on our gas hot water heater. I am able to relight it and the burner fires up but hours later we notice no hot water and the pilot light is out again. Help? What shall I try?
How to change thermal coupler on gas hot water heater. Whirlpool How to change hot water heater thermal coupler
I have a 40 gallon hotpoint gas hot water heater in a foreclosure I bought that set for about a year empty. I had hot water pouring out a line under the house so I capped it (stupid I know). Well after talking to a home inspector he told me that it was probably my pressure relief line and my t and...
Hello Everyone~ My electric hot water heater is leaking from the relief valve. Not dripping, but like a tap turned on. And this only happens when the power is on to it. When the power to it is off, and the water is cold, it doesn't leak. Otherwise it appears to work fine. Any experienced...
When I turn my hot water faucets on I have no water coming in at all, but I have hot water in the hot water tank.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
