Ask Experts Questions for FREE Help !
Ask
    Fabco's Avatar
    Fabco Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 9, 2012, 04:32 PM
    State water heater censible prv 40
    I have a State Water Heater Censible model # PRVNOVT1D, the pilot light keeps going out, there are no obstructions and everything is dust and dirt free. Any suggestions?
    snowy nevada's Avatar
    snowy nevada Posts: 1, Reputation: 1
    New Member
     
    #2

    Jul 12, 2012, 07:19 PM
    Assuming that you light the pilot, and it appears to be working for awhile, and then shuts off, there is a sensor above the pilot light that shuts off the gas if it determines the water temperature is too high. The pilot light must be re-lit if that happens.

    If the pilot won't stay lit, there is a thermocouple directly in the path of the pilot light that must stay hot in order to tell the controller to deliver the main gas. If the thermocouple is faulty, you won't get your main gas, and the pilot light could go out.

    A significant draft could extinguish the pilot light, but you'd know it due to hurricane wind speeds.

    Mostly commonly the thermocouple above the pilot light needs replacing.
    mvmedina's Avatar
    mvmedina Posts: 1, Reputation: 1
    New Member
     
    #3

    Dec 6, 2012, 04:58 PM
    Where can I find a replacement knob for the control valve on my PRV 40 Noc 52C?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water heater PRV 50 nbrto [ 4 Answers ]

Hello. We have a State Water Heater Model PRV 50 NBRTO, CAPACITY 50, NATURAL GAS. I can't seem to locate any manual for this model water heater. I seem to have an issue where my water will be hot for a little while then go luke warm. Or it doesn't get as hot as I would like. I have a...

State Censible PRV 50 NOVT1 water heater [ 2 Answers ]

I have a water heater with State Censible PRV 50 NOVT1 model and the power fan is running continuously even long time after the gas burner was turned off. Looks like a thermocuple problem? Please let me know?

I have a State Censible PRV40 North water heater [ 0 Answers ]

I'd like to build a wall on the one side of it, I've read where it should be 24" clearance to the front but I don't see anything about side clearance... can anyone help?

State Gas Water Heater- md# gs650ybrt -. Heater won't stay lit. [ 1 Answers ]

Statye gas water heater model gs650ybrt. Heater won't stay lit

Censible hot water heater is turned all the way up but runs out of hot water. [ 1 Answers ]

A 20 year old Censible 50 Gal 510E hot water heater runs out of hot water after 1/2 showers. Temp control is turned to maximum. No leaks observed. Additionally, it appears to take a bit of time before hot water materializes at all faucets. Replacement contemplated but does it appear this is...


View more questions Search