 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Murray Riding Mower 40702X92A
I have no idea how long this mower has been setting up but while turning the key the engine tunes over but soon stops due to what I believe the gears in the starter being stripped out. Could this be my problem and how readily available are parts for this old mower?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an older murray rider.It's a 30",12hp,rear engine.Can anyone tell me where to find the model#.I looked under the seat and on the frame and haven't had any luck.Thanks Joe.
good afternoon, I have a murray riding mower (40708x92a) and trying to figure out what size drive belt and deck belt to get. Mower been sitting for a while and had used belt to another mower. Appreciate any hep you can give. Thanks.:confused:
I have a Murray Model 42910x92a riding mower. I started it the other day and it ran for about 2 minutes then died. I tried to start it again, but the starter would not turn over; there was no "click" of the solenoid. I checked the battery, has plenty of juice. I bridged the solenoid and the...
I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.
I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?
View more questions Search
|
