Ask Experts Questions for FREE Help !
Ask
    dhitt's Avatar
    dhitt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2012, 07:08 AM
    Fuel supply trouble with huskee 690
    My Huskee, model 690, riding lawn mower, will run only if I spray either into the carb, so the ignition circuit is working. Fuel is getting to the carb bowl entrance, but apparently not to the engine. It must be something downstream of the fuel entering the carb bowl. What is the wire on the bottom of the carb bowl? Is that a solenoid that shuts off fuel flow? Would this be something associated with one of the many "safety switches" on the seat, brake, etc.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 8, 2012, 05:02 PM
    Hi,
    It is indeed a fuel shutoff solenoid but should only be connected to the key switch. Check it for voltage with switch in Run position, trace wire.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Have a huskee 16.5 will not turn over. Has fuel, oil has been checked, battery fine. [ 1 Answers ]

I tried starting it but it will not turn over, had a back fire, I checked the sparkplug looks fine, no burn marks as such. Don't know if it is the choke or what. Battery was taking out and properly recharged, All it does is turn but does not engage. Any suggestions?

Huskee LT4200 starting trouble?Have trou [ 0 Answers ]

Have trouble getting mower started. Wants to backfire a lot but will run perfect after it starts.

1989 chev4x4 have trouble starting sometimes changed fuel pump. [ 0 Answers ]

Forgot to say If I wait long enough pump gas pedal hard enough (which doesn't make sense on fuel injection) it so far has started. Thank You

My beckett fuel pump does not supply fuel to nozzle [ 1 Answers ]

I get fuel to my fuel pump but the fuel does not come out the supply side were the nozzle line connects to

View more questions Search