Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing starter on 20HP Briggs
[ 3 Answers ]
I have a craftsman riding mower with a 20 hp Briggs engine. The starter gear has gone south - I bought a new starter from Amazon and started to replace the old starter complete, but can only get one of the two starter mounting to the block bolts out - the second of the two is in an almost...
B&S 20hp won't start
[ 3 Answers ]
I was using my Troy Bilt the other day and it died as if it was out of gas. The tank is full and I checked to ensure the fuel pump was working; it is. I have plenty of gas right up to the front of the engine (just under the air filter). I can pour a small amount directly into the carb and it...
20hp briggs will not turn-over
[ 2 Answers ]
I have a 2000 craftsman mower with 20hp briggs I/C platinum engine. The starter will engage but will not turn the engine over. I have tried to jump direct to the starter and it still won't turn-over. I have also removed the plugs in order to reduce the compression and the load on the engine, still...
Briggs V Twin 20HP
[ 2 Answers ]
Hi, I have a Farm and Fleet garden tractor with a Briggs 20 HP V Twin engine. It started running lean recently. If you run at 3/4 choke, it runs OK. But will not run past idle when warm and the choke opened. I noticed the fuel filter bowl seemed almost empty. I replaced the pump thinking it...
20HP MTD won't start
[ 3 Answers ]
Two weeks ago, I replaced my battery and solenoid. I was happy. Mowed my two acres and stopped and started the engine numerous times without any problems. When I turned it off the last time, that is turned the key off, the engine didn't keep running per se, but made a whining noise. I tried the... View more questions Search
|