 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cub Cadet
I was cutting grass with my cub cadet LT1045 and the POT fell off, the crank bolt came out and as I said the PTO fell off. I put the PTO back on and the mower would not start, I could hear the starter engage but it will not turn the motor. I purchased a new PTO and installed it and still have the same issue. If someone could help with this I would really appreciate it. By the way it cranks and runs fine with out the PTO.
|
||||
Check out some similar questions!
I have an old Cub Cadet 1620 hydro and when I start moving it goes great. Then it slows down and will hardly move. It mows great, but it will only go a few miles an hour. Any ideas of what the problem is?
This seems to be a common question, but no viable answers work for the pto removal. Does the pulley have to be removed before I can pull off the pto unit? Electric for a 2145 cub cadet. Onan motor.
The electric clutch will not stay engaged on my 1620 cadet the mower deck will run only if you hold up the switch I have swaped it out with another switch and no difference what or where do I look for the problem it acts like it may be a safety type issue
Hi I need help with my 1620 cub cadet can anyone tell me how to bleed or purge air out of hydrostatic unit?Thanks
My cub cadet makes a noise in the transaxle when I am going up hill and stops moving it sounds like a grinding noise can anyone help?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
