Ask Experts Questions for FREE Help !
Ask
    bry's Avatar
    bry Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2012, 08:15 PM
    My sliding glass door is hitting the center frame of the stationary panel, not closing
    My sliding glass door is hitting the center frame of the stationary panel, causing it to stop about 1/2 inch short of closing completely. The two frames are hitting and the door will not close further without major manuevering. It rolls fine otherwise. Is there a way to fix this?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 3, 2012, 07:01 AM
    May have to lift the roller back on the track.
    You may have to loosenen the phillips in the jamb, next to the roller to get slack, then tighten back up to lift into place.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #3

    Jun 3, 2012, 07:08 AM
    I agree with Stramando. It appears that back roller is on inside of roller guide.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to frame a sliding door [ 3 Answers ]

Greetings, we are building a patio15'x30' wich will have 3 sliding doors in the design,the roof will be of a fiberglass material material that looks like old fashioned zinc sheets. What type of framing is required for a patio this size... also I was thinking of building the deck first and ahen...

My sliding glass door with aluminum frame is leaking from the top [ 1 Answers ]

My 25 year old 3 level townhouse's slider in the basement level is leaking from the top of the frame on the fixed glass side. There is no evidence of moisture on the interior walls on the two levels above the door, nor on the wall above it. The roof looks fine on the outside. There is a deck...

Warped sliding glass door frame causes door to stick. [ 5 Answers ]

The center of our 8 foot sliding glass door bends out about 3/8 inch more than the two ends causing the door to wedge against trim that keeps the door from falling out when the door is closed making it difficult to open the door. How do I get the center of the door frame into place so the door...

Sliding glass door [ 1 Answers ]

I need basic instructions for installing a sliding glass door. Irene

View more questions Search