Ask Experts Questions for FREE Help !
Ask
    wcrider's Avatar
    wcrider Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2012, 07:52 AM
    GlacierBay faucet.
    On a GlacierBay single handle faucet, how do you remove the handle. The handle was put on backwards.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jun 1, 2012, 08:06 AM
    Can you tell us the model number please?

    John
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jun 1, 2012, 11:35 AM
    Look under and to the rear for a Allen Head Set Screw. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I replace kitchen faucet sprayer with a undersink water filter faucet? [ 1 Answers ]

I have a old kitchen kitchen faucet with attached sprayer. I want to install a Culligan undersink filter which comes with a water faucet that REPLACES the sprayer. I have very limited room under the sink to work in. I cannot even get any normal open end wrenches/adjustibles to work with limited...

After shutting off the main line to fix a faucet, another faucet started running slow [ 3 Answers ]

I shut off the main line to fix the tub faucet. When I turned the main line back on the sink, in the same bathroom, had low water pressure. This wasn't the case prior to the job. It's very cold now so I thought perhaps a water line was frozen, however, every other faucet in the house is running...

Squeaky hinges on GlacierBay Mirrored front med. Cab. [ 1 Answers ]

I bought 2 GlacierBay medicine chests with oval mirror door. Both hinges squeak. What can I do to get rid of this squeak? I am reluctant to spray on a lubricant because I don't want to dameage the finish on the inside of the cabinet.

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

View more questions Search