 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intermittent heatpump
I have a 20+ Dico programmable thermostat and an intermittent Trane heatpump. Outside fan runs, Freon is okay, inside coils frost up and hear the backwash but no cooling. Shut off thermostat for an hour or two, we're back to cooling. Replaced with a Honeywell thermostat. Cooled for a few hours and stopped working. Re-installed Dico thermostat and live with shutting heatpump off every few hours or days. Serviceman wants to install their thermostat and hope the heatpump fails while they are on site. Any suggestions
|
||||
Check out some similar questions!
Hi I live in AL where the temps are 90+ degrees for 6 months or more and are looking at new heat pumps. We have had one company recommend an Amana 4 ton 2 stage heat pump for our 2200 sq ft house with vaulted ceilings and sklights. We are also looking at an American Standard because me Dad...
I have a lennox heat pump and when it is turned on in the heat mode the head pressure goes up 500psi and compressor starts to over amp but when it is turned over to coolling the unit runs fine it is a 410a unit
I have a Goodman (Janitrol) Model # CPE36-1AB heatpump cooling AC system about 14 years old (new in 1992). The outside unit comes on in heat mode but the blower sometimes doesn't come on in the air handler . I can feel the insulated pipes leading into the evaporator are hot in the air handler and...
I have a 1400sq foot 2 story home built in 2005 with a single heat pump. The thermostat is located on the first floor. During the winter the heat will run and run to try to maintain the temperature on the first floor but the second floor will bake. For example, the first floor may be set to 70 but...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
