Ask Experts Questions for FREE Help !
Ask
    mdmaynard's Avatar
    mdmaynard Posts: 40, Reputation: 1
    Junior Member
    		  
    #1

    May 29, 2012, 11:01 AM
    murray 40508x92
    I have a Murray 40508x92 40" riding mower. The housing (spindle/mandrel/jackshaft) has been damaged. I am trying to remove this part from another parts mower I have.

    I have removed the blade but I have no idea how to remove bolt on top of the jackshaft Pully. The pulley keeps moving and there is a spacer so I am unable to get pipe wrench below the pulley to hold and keep from spinning as I try to loosen nut. Any ideas or tricks to get this off so I can replace housing.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 8, 2012, 02:23 PM
    Hi,
    The blade adapter and spindle are bot splined. Try the pipe on the adapter to hold it.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray part number for spindle assembly for a model#42515x92B Murray mower [ 0 Answers ]

I need a Murray part number for spindle assembly for a model#42515X92B Murray mower

Need transmision belt diagram for murry #40508X92 mower [ 1 Answers ]

I have a Murry 14.5 hp 42 in. cut mower. The model number is 40508X92. I need a daigram for replacing the trasnmisson belt. The area I am having a prblem with is at the tension pulley.

How old is my Murray? [ 2 Answers ]

I inherited a self-propelled 22' Murray Legend, model 22753x92a. The label says "Date of manufacture 0562". Can it be a 1962 model? (It needs some work and I'm trying to make a fix-or-buy decision.) Has run great the 6 years I've had it.

Murray 12.5 [ 1 Answers ]

Thanks MOWERMAN2468, since it was made in 97, do youo know of any website that may have info on it. Went to Murray and they said if it was made past 2003, there's no info.

Murray 17.5 hp 46 in [ 1 Answers ]

I need help with a mower belt diagram. I need them replaced and the small belt 37x69 has the far right pulley touching the pulley to the immediate left which is also touching the leveling bracket(fixed). Any help is appreciated. Thanks

View more questions Search